Updated November 2026

An OBD2 scanner with ABS support lets you read anti-lock brake system fault codes, see live wheel speed data and check whether the problem is a sensor, a wiring fault or something more serious. Most standard OBD2 scanners only read engine codes, so the ABS module needs a scanner that can talk to the brake control unit directly. This guide walks through connecting the tool, reading the codes and narrowing down the fault. OBD2 Scanner for ABS Light: How to Read the Code and Find the Fault goes further into this.

Check That Your Scanner Can Reach the ABS Module

Many entry-level readers only query the engine control module, which means an ABS warning light will show no codes. Look for a scanner that lists ABS or chassis systems in its menu, or one that specifically states ABS support. An obd2 and abs scanner is usually labeled as such, and some models also cover SRS (airbag) modules. If you are unsure, check the product description for the list of supported systems before you buy.

Shopping for one? See our guide: 3 Best OBD2 Scanners for Nissan Rogue Compared (2026).

Read and Record the ABS Codes

  1. Park on level ground, switch the ignition off and plug the scanner into the diagnostic port under the dashboard, usually near the steering column.
  2. Turn the ignition to the on position without starting the engine.
  3. Select the ABS or brake system from the scanner menu. If your tool asks for the vehicle year, make and model, enter them accurately.
  4. Write down every code exactly as shown, including the letter prefix (C for chassis codes on most ABS faults) and any status such as “current” or “pending.”
  5. Note the freeze frame data if the scanner offers it. It shows the wheel speeds and conditions when the fault was logged.

Interpret the Codes and Find the Fault

An ABS code points to a circuit or condition, not always the part that failed. A wheel speed sensor code, for example, may be caused by a cracked sensor ring, a damaged harness or a sensor clogged with brake dust. Use the code list in your service manual or the scanner’s built-in definitions to narrow the fault. For a broader walkthrough of reading codes, see Using an OBD2 Scanner: Read Your Car's Codes in 5 Simple Steps.

Live data is often more useful than the code alone. With the scanner connected, drive slowly and compare the four wheel speed readings. A sensor that reads zero, jumps erratically or lags behind the others usually points to the fault. OBD2 Scanner for ABS Sensor: How to Read ABS Codes and Find the Fault covers this comparison in more detail.

Clear Codes Only After the Repair

Clearing an ABS code without fixing the cause just makes the light return. Clear codes after the repair, then drive the car and confirm the code does not come back. Some ABS faults also need a sensor recalibration or a brake bleed, and your manual will list any required procedure. If you are working with a Toyota, the steps for reading codes on that platform are similar, as shown in Toyota Corolla OBD2 Scanner: How to Read and Clear Codes at Home.

Common Mistakes

  • Buying a basic engine-only reader and expecting ABS codes to appear.
  • Replacing a wheel speed sensor before checking the wiring and the tone ring.
  • Clearing codes and ignoring the root cause, which lets the fault return.
  • Ignoring a brake warning light that appears alongside the ABS light.
  • Driving on a faulty ABS system in poor conditions. ABS helps prevent wheel lock during hard braking, so treat a fault as a safety issue.

A scanner with a dedicated ABS menu is the most direct tool for this job. Look for one that supports chassis systems, not only engine codes.

  • An ABS-capable handheld scanner lets you read brake module codes without a laptop. View on Amazon
  • A Bluetooth adapter paired with a phone app is useful for live wheel speed monitoring while you drive. View on Amazon

FAQ

Will a standard OBD2 scanner read ABS codes?

Usually not. Standard engine-only readers query the engine control module, so you need a scanner that lists ABS or chassis systems to see brake codes.

Can I drive with the ABS light on?

The car will still brake, but without anti-lock assistance. Have the fault checked soon, especially before driving in rain, snow or on slippery roads.

Does clearing an ABS code fix the problem?

No. Clearing only removes the code. If the fault is still present, the light will return. Repair the cause first, then clear the code. Worth reading next: Obd2 Scanner for Wheel Speed Sensor: Read ABS Codes and Test the Sensor.

Conclusion

An OBD2 scanner with ABS support turns a glowing brake light into a specific code you can investigate. Read the codes, check live wheel speed data and fix the root cause before clearing anything. If the problem involves brake hydraulics or you are not confident with the repair, consult a qualified mechanic.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our car care & garage supplies guides, checking product details against manufacturer specifications and owner feedback.