Updated November 2026

To rent a OBD2 scanner, you can borrow one from certain auto parts chains, tool lending libraries, or a local shop that offers loaner tools. Once you have the scanner, you can read the trouble codes stored in your car’s computer, see what the check engine light is reporting, and clear the code after the repair. This guide covers where to find a rental, what to check before you leave with one, and how to get useful results in one visit.

Where to Find a Rental OBD2 Scanner

Most people never need to rent a scanner because many auto parts stores will read codes for free. The difference is that a store reader usually only shows the code number, while a loaner tool lets you keep the scanner for a few days and look at live data. Check these options:

Shopping for one? See our guide: 3 Best OBD2 Scanners for Nissan Rogue Compared (2026).

  • Tool lending libraries. Some public libraries and community makerspaces lend automotive diagnostic tools. Call ahead, since many require a deposit or a membership.
  • Tool loaner programs at auto parts chains. Some chains lend specialty tools against a refundable deposit, and the deposit is returned when you bring the tool back in good condition. Policies vary by store, so confirm before you drive over.
  • Independent repair shops. A local shop may let you borrow a scanner for a short period, especially if you are a repeat customer.

What to Check Before You Borrow a Scanner

Not every rental scanner is suited to every car. Before you leave the counter, confirm that the tool supports OBD2 and the protocols your vehicle uses. Any car sold in the US from 1996 onward should use OBD2, and the port is a 16-pin trapezoid connector under the dashboard, usually near the steering column.

  1. Confirm the tool reads generic OBD2 codes, not only the manufacturer’s own codes.
  2. Ask whether the tool can read live sensor data, since that helps with diagnosis.
  3. Ask whether it can clear codes and reset readiness monitors.
  4. Check the cable, screen, and buttons for damage and note any existing scratches on paper.

How to Read Codes with a Rented Scanner

Once you are home, the process is the same for most tools. Turn the ignition to the “on” position without starting the engine, plug the scanner into the port, and wait for it to power up. Select the option to read codes, then write down each code exactly as it appears, such as P0300 or P0171.

Codes beginning with P describe powertrain faults, B covers body systems, C covers chassis, and U covers network communication. The code tells you which system reported the fault, not which part to replace. A P0171 code, for example, means the engine is running lean, which could point to a vacuum leak, a dirty mass airflow sensor, or a fuel delivery issue.

Clearing Codes and Confirming the Fix

Only clear a code after you have made a repair, or the light will return. After clearing, the car’s readiness monitors need to run again, which usually takes a few drive cycles of mixed city and highway driving. Some stores may ask you to bring the tool back with the monitors not yet complete, so plan your return accordingly.

Common Mistakes to Avoid

  • Clearing codes before you have fixed the problem, which only hides the warning.
  • Ignoring the freeze frame data, which records conditions when the fault first appeared.
  • Returning the scanner with the deposit unpaid because you forgot the store’s return window.
  • Assuming one code always means one part. Check sensor readings and wiring before buying parts.

If renting is inconvenient, owning a basic reader can save time on future check engine lights. A small Bluetooth dongle paired with a phone app lets you read codes in the driveway whenever the light comes on. View on Amazon

For a standalone handheld unit that shows codes and basic live data without a phone, look for a dedicated code reader with a backlit screen. View on Amazon

FAQ

Can I rent an OBD2 scanner for free?

Some tool lending libraries and loaner programs lend scanners at no charge, while others require a refundable deposit. Policies differ by location, so call ahead before you visit.

Will a rented scanner work on any car?

Any car sold in the US from 1996 onward uses OBD2, so a generic scanner should connect. Some manufacturer-specific systems, such as airbag or ABS modules, may need a more advanced tool.

Do I need to return the scanner with codes cleared?

You do not need to clear codes before returning it, though clearing them makes the car’s status easier to read later. Ask the store whether they prefer the scanner returned in a particular state.

Conclusion

Renting an OBD2 scanner is a practical way to read a check engine light without buying a tool you may use only once. Confirm the scanner’s features before you leave, write down every code, and fix the underlying problem before you clear anything. For more step-by-step help, see Using an OBD2 Scanner: Read Your Car's Codes in 5 Simple Steps.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our car care & garage supplies guides, checking product details against manufacturer specifications and owner feedback.