Updated November 2026

The Autel AutoLink AL319 OBD2 scanner is a simple code reader that lets you pull trouble codes from most cars and light trucks sold since 1996 without a trip to the shop. This guide walks you through plugging it in, reading and writing down codes, checking freeze frame data, and clearing codes safely. You will also learn what the scanner can and cannot tell you.

Before You Start

Gather a few basics first. Park on level ground, set the parking brake, and turn the ignition off. Have a notepad or your phone ready, because the scanner shows one code at a time and you will want a written record.

Shopping for one? See our guide: 3 Best OBD2 Scanners for Nissan Rogue Compared (2026).

  • The Autel AutoLink AL319 code reader
  • Your vehicle’s owner manual, for the location of the diagnostic port
  • A pen and paper or a notes app
  • Your VIN, if you plan to look up codes online later

How to Connect the AL319 and Read Codes

  1. Locate the 16-pin OBD2 port. On most vehicles it sits under the dashboard on the driver’s side, near the steering column, though some models put it in the center console or behind an access cover.
  2. With the ignition off, plug the AL319 firmly into the port. The unit should power up from the vehicle.
  3. Turn the key to the “on” position without starting the engine. This lets the car’s computer respond to the scanner.
  4. Select the read codes function and let the scanner finish its scan. Diagnostic trouble codes usually appear in the format P0300, C0035, B1234 or U0100.
  5. Write down every code, in the exact order shown. Note whether each one is marked as current (active) or pending.

Checking Freeze Frame Data

Freeze frame data is a snapshot of sensor readings taken when the computer first logged a fault. Values such as engine RPM, coolant temperature, vehicle speed and fuel trim at that moment can point you toward the cause. Record these values alongside the code, because clearing the code erases them.

Interpreting Codes Without Guessing

A code tells you which circuit or system the computer flagged, not which part has failed. A P0171 code, for example, means the engine is running lean, which could come from a vacuum leak, a dirty mass airflow sensor or a weak fuel pump. Look up the exact code for your make and model, then test the most likely cause first. Replacing parts by code alone is how many owners end up spending money on the wrong component.

Code Prefix System Typical Example
P0xxx Powertrain (engine, fuel, emissions) P0300 random misfire
C0xxx Chassis (brakes, steering, suspension) C0035 wheel speed sensor
B0xxx Body (airbags, lighting, climate) B1234 airbag circuit
U0xxx Network (communication between modules) U0100 lost communication with ECM

Clearing Codes the Right Way

Once you have repaired the fault, use the AL319 to erase the codes. Turn the ignition on, select the erase option, and confirm. Afterward, the check engine light should go off. If it returns, the problem is still present.

Do not clear codes just to turn off the light before an inspection. Clearing resets the emissions readiness monitors, and most smog programs will reject a vehicle whose monitors are not complete. Drive the car through a normal mix of city and highway driving for several days before testing.

Common Mistakes

  • Clearing codes before writing them down, which erases freeze frame data.
  • Replacing parts based only on the code description instead of testing first.
  • Ignoring pending codes, which often show a problem before the light comes on.
  • Plugging the scanner in while the engine is running and the cable is stretched near belts or fans.
  • Assuming a cleared code means a fixed car. Recheck after a few drive cycles.
  • Autel AutoLink AL319: A straightforward code reader for quick checks at home, useful if you mostly want to read and clear codes. View on Amazon
  • Blue-tooth OBD2 adapter with a phone app: Suits owners who want live data graphs while they drive. View on Amazon

If you want to go further, related guides on this site cover the limits of these tools, including OOBD2 Scanners and Code Readers: What They Can and Cannot Tell You and Wireless Bluetooth OBD2 Scanner: How to Pick and Use One at Home.

FAQ

Will the AL319 work on my car?

Most passenger cars and light trucks sold in the US since 1996 use the standard OBD2 port and will work. Some very old, imported or heavily modified vehicles may not respond, so check your owner’s manual for compatibility.

Does clearing a code fix the problem?

No. Clearing only removes the stored code and turns off the light. The fault will return and the code will reappear if the underlying issue is still there.

Can I use the scanner while driving?

Do not operate the scanner while the vehicle is moving. Read codes with the car parked, and have a passenger handle the device if you need to watch live data on the road.

Conclusion

The Autel AutoLink AL319 gives you a quick way to read codes, record freeze frame data and clear faults once you have fixed them. Use the codes as a starting point for testing, not as a final diagnosis. For brake, airbag or fuel system work, consult a qualified professional.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our car care & garage supplies guides, checking product details against manufacturer specifications and owner feedback.